topic Re: ASA Missed Command in Network Security

ASA Missed Command

CSCO11177524 — Fri, 21 Feb 2020 11:42:02 GMT

hi everybody

I am new on the Cisco Security field, and i got a problem with an ASA that i have, thats the new one ASA 5520, i upgrade the IOS to 8.2 and its boot up, so some command is missed like ip address, and other usefull commands, can somebody let me know what wrong with that?

Re: ASA Missed Command

Collin Clark — Fri, 25 Sep 2009 12:59:55 GMT

I'm not sure what you mean. Can you post what you are seeing in the console output?

Re: ASA Missed Command

CSCO11177524 — Fri, 25 Sep 2009 13:12:38 GMT

ciscoasa# show ver | in Version

Cisco Adaptive Security Appliance Software Version 8.2(1)

Device Manager Version 5.2(4)

when i try to config the interface ip address:

ciscoasa(config)# interface gigabitEthernet 0/0

ciscoasa(config-if)# ip addr

ciscoasa(config-if)# ip addr ?

ERROR: % Unrecognized command

ciscoasa(config-if)# ip addr

ciscoasa(config-if)# nameif ?

ERROR: % Unrecognized command

ciscoasa(config-if)# nameif

I need to know why doenst appear that command?

Re: ASA Missed Command

Collin Clark — Fri, 25 Sep 2009 13:17:41 GMT

Try creating a VLAN and then assign the physical interface to a VLAN-

ciscoasa(config)# vlan 5

ciscoasa(config-if)# nameif inside

ciscoasa(config-if)# ip address 192.168.1.254 255.255.255.0

exit

ciscoasa(config)# int gi0/0

ciscoasa(config-if)# switchport access vlan 5

Re: ASA Missed Command

Collin Clark — Fri, 25 Sep 2009 13:25:27 GMT

These should be some helpful links-

Description of Ports

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1072160

How to configure interfaces

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1125063

Configuring the switchports

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1088804

Re: ASA Missed Command

CSCO11177524 — Fri, 25 Sep 2009 22:30:39 GMT

I will try that!

Thanks so much,