ASA Between Two Buildings W/ Diff Subnets. How Do I extend the Network?

mlenco — Fri, 21 Feb 2020 11:00:22 GMT

I have two buildings with two different networks. Users at building one want to be on the network at building two. Standard routing obviously won't work so should I put two ASA at both buildings and [IPSEC] VPN between buildings extending the network? Will this work? If so, where are the commands in the ASA Config Guide?

Thanks...if you can get this to me very quick.

Matt

Re: ASA Between Two Buildings W/ Diff Subnets. How Do I extend t

JORGE RODRIGUEZ — Fri, 12 Sep 2008 15:48:30 GMT

Matt, a litle more info would help, are each building totally separate in terms of physical connectivity any fiber in between them, are both buildings the same company? does each have its own Internet ISP?

If there is no connectivity between them other than the internet and if each building have its own ISP it is assume then that there is already a firewall , if this is the case you can implement L2L vpn and connect the two networks via Ipsec over internet.

Here is a typical scenario

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080950890.shtml

Rgds

Jorge

PLS rate any helpful post

topic ASA Between Two Buildings W/ Diff Subnets. How Do I extend the Network? in Network Security

ASA Between Two Buildings W/ Diff Subnets. How Do I extend the Network?

Re: ASA Between Two Buildings W/ Diff Subnets. How Do I extend t