topic Re: ASA 5510 Security Plus - ACTIVE/ACTIVE not enabled in Network Security https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007827#M419781 <HTML><HEAD></HEAD><BODY><P>I believe you need to activate the license before the features are enabled. You should have received a PAK with the ASA. Usually it is a white envelope with a single sheet of paper in it. Go to <A class="jive-link-custom" href="http://www.cisco.com/go/license" target="_blank">http://www.cisco.com/go/license</A>, enter the key there and you will receive a file via email that you upload to the ASA. </P><P></P><P>BTW ASA 5505 does not support contexts. </P></BODY></HTML> Fri, 18 Apr 2008 13:07:45 GMT tahequivoice 2008-04-18T13:07:45Z ASA 5510 Security Plus - ACTIVE/ACTIVE not enabled https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007825#M419775 <P>Hello,</P><P></P><P>I just checked one of our new ASA 5510 for the license that is configured on it. It shows a Security plus license but for some reason it shows 0 security contexts available (the device is just out of the box and is not configured yet) and there is no way to issue the command "mode multiple" either.</P><P>Looking at the Cisco documention I've seen that Security plus enables contexts....</P><P></P><P>Did anybody come across the same issue?</P><P></P><P>Regards.</P> Fri, 21 Feb 2020 09:58:16 GMT https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007825#M419775 deephazz02 2020-02-21T09:58:16Z Re: ASA 5510 Security Plus - ACTIVE/ACTIVE not enabled https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007826#M419778 <HTML><HEAD></HEAD><BODY><P>ASA 5505 Security Plus License with Failover and Dual-ISP Backup : This configuration creates five VLANs: inside, outside, dmz, backup-isp and faillink </P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/examples.html#wp1038603" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/examples.html#wp1038603</A></P></BODY></HTML> Fri, 11 Apr 2008 17:56:16 GMT https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007826#M419778 vkapoor5 2008-04-11T17:56:16Z Re: ASA 5510 Security Plus - ACTIVE/ACTIVE not enabled https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007827#M419781 <HTML><HEAD></HEAD><BODY><P>I believe you need to activate the license before the features are enabled. You should have received a PAK with the ASA. Usually it is a white envelope with a single sheet of paper in it. Go to <A class="jive-link-custom" href="http://www.cisco.com/go/license" target="_blank">http://www.cisco.com/go/license</A>, enter the key there and you will receive a file via email that you upload to the ASA. </P><P></P><P>BTW ASA 5505 does not support contexts. </P></BODY></HTML> Fri, 18 Apr 2008 13:07:45 GMT https://community.cisco.com/t5/network-security/asa-5510-security-plus-active-active-not-enabled/m-p/1007827#M419781 tahequivoice 2008-04-18T13:07:45Z