topic Re: ASA 5510 to Netscreen in Network Security

ASA 5510 to Netscreen

smkauffman — Fri, 21 Feb 2020 09:56:23 GMT

I work for a company in the US with a parent company in Japan. I'm trying to replace the Netscreen firewall at this end with a new ASA 5510 and have it l2l with the Netscreen that is likely at the other end. Anyone have any ideas?

Re: ASA 5510 to Netscreen

didyap — Tue, 18 Mar 2008 20:51:43 GMT

The ASA configuration will be same as it would be for and ASA to ASA vpn. Following link may help you

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800ef796.shtml

Re: ASA 5510 to Netscreen

smkauffman — Wed, 19 Mar 2008 11:00:26 GMT

I figured things out by setting the new ASA up as though it were a seperate building and connecting it to the internet along with my existing Netscreen. I was able to set up a VPN between the ASA and my Netscreen by following the procedure outlined here http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml for the Netscreen configuration. I believe the problem is that the Netscreens are currently set up with manual key IKE instead of the autokey IKE outlined in the example. I am now putting together instructions for my counterparts at the Japan end of the connection to change their end of the VPN so I can switch to the new ASA here.

Thanks,

Steve