topic Re: Problem adding ASA to Cisco Security Manager in Network Security https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706883#M422391 <HTML><HEAD></HEAD><BODY><P>Ah thank you, I'll give that a try.</P></BODY></HTML> Tue, 27 Mar 2007 07:06:09 GMT jason.scott 2007-03-27T07:06:09Z Problem adding ASA to Cisco Security Manager https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706881#M422389 <P>Can anyone confirm please if it should be possible to add an ASA 5520-AIP-SSM into Cisco Security Manager?</P><P></P><P>Each time I try it fails telling me the OS, context mode or routing mode is not supported.</P><P></P><P>I'm running the ASA box in single context, routed mode. I've tried older 7.1 firmware but have recently upgraded it to 7.2.</P> Fri, 21 Feb 2020 09:27:19 GMT https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706881#M422389 jason.scott 2020-02-21T09:27:19Z Re: Problem adding ASA to Cisco Security Manager https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706882#M422390 <HTML><HEAD></HEAD><BODY><P>You have to add the ASA and the AIP-SSM seperately. Currently, I think CSM only supports upto v7.1 code which is why you might be seeing the error message. As a workaround, try adding the ASA using the 'add device from config file' method. Add the AIP-SSM using the 'add new device' method. Make sure the AIP-SSM has a management address and that the AIP-SSM lists the CSM ip address as an allowed host.</P></BODY></HTML> Mon, 26 Mar 2007 21:32:26 GMT https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706882#M422390 rcullum 2007-03-26T21:32:26Z Re: Problem adding ASA to Cisco Security Manager https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706883#M422391 <HTML><HEAD></HEAD><BODY><P>Ah thank you, I'll give that a try.</P></BODY></HTML> Tue, 27 Mar 2007 07:06:09 GMT https://community.cisco.com/t5/network-security/problem-adding-asa-to-cisco-security-manager/m-p/706883#M422391 jason.scott 2007-03-27T07:06:09Z