topic Upgrading ASA from command line in Network Security https://community.cisco.com/t5/network-security/upgrading-asa-from-command-line/m-p/688435#M422575 <P>I've upload a new flash image to my ASA and can see it when doing a "Sh Flash" command.</P><P></P><P>However, we rebooting it is not used. What is the proper procedure to get it to use an image file?</P><P></P><P>Would I use...</P><P></P><P>boot system flash:/asa722-k8.bin</P><P></P><P>We are currently using 7.02 (disk0:/asa702-k8.bin)</P><P></P> Fri, 21 Feb 2020 09:23:19 GMT smsialane 2020-02-21T09:23:19Z Upgrading ASA from command line https://community.cisco.com/t5/network-security/upgrading-asa-from-command-line/m-p/688435#M422575 <P>I've upload a new flash image to my ASA and can see it when doing a "Sh Flash" command.</P><P></P><P>However, we rebooting it is not used. What is the proper procedure to get it to use an image file?</P><P></P><P>Would I use...</P><P></P><P>boot system flash:/asa722-k8.bin</P><P></P><P>We are currently using 7.02 (disk0:/asa702-k8.bin)</P><P></P> Fri, 21 Feb 2020 09:23:19 GMT https://community.cisco.com/t5/network-security/upgrading-asa-from-command-line/m-p/688435#M422575 smsialane 2020-02-21T09:23:19Z Re: Upgrading ASA from command line https://community.cisco.com/t5/network-security/upgrading-asa-from-command-line/m-p/688436#M422576 <HTML><HEAD></HEAD><BODY><P>The issue is due to the boot option that you have mentioned in the ASA. This boot option determines the boot image when the ASA boots.</P></BODY></HTML> Wed, 31 Jan 2007 22:06:11 GMT https://community.cisco.com/t5/network-security/upgrading-asa-from-command-line/m-p/688436#M422576 bwilmoth 2007-01-31T22:06:11Z