topic Re: ASA Multiple Context NAT problem in Network Security https://community.cisco.com/t5/network-security/asa-multiple-context-nat-problem/m-p/644899#M422698 <HTML><HEAD></HEAD><BODY><P>hi sam u would get this error when u are using a shared interface in multiple context mode. make sure to use different global addresses when using a shared interface. when using seperate interfaces in context u will not face this problem. </P><P></P><P>see ya </P><P></P><P>regards</P><P></P><P>sebastan</P><P></P></BODY></HTML> Mon, 04 Dec 2006 21:16:39 GMT sebastan_bach 2006-12-04T21:16:39Z ASA Multiple Context NAT problem https://community.cisco.com/t5/network-security/asa-multiple-context-nat-problem/m-p/644898#M422696 <P>Dear all,</P><P></P><P> I am having problem when configuring NAT in multiple context. Since the 2 context are sharing the same subnet in some interfaces, I use the same nat/global command in both contexts. But turns out reporting 'the same global ip is used by another context'. Is there any clue on this?</P><P></P><P>Thanks in advance.</P><P></P><P>Br,</P><P></P><P>Sam</P> Fri, 21 Feb 2020 09:19:54 GMT https://community.cisco.com/t5/network-security/asa-multiple-context-nat-problem/m-p/644898#M422696 fwpsamcisco 2020-02-21T09:19:54Z Re: ASA Multiple Context NAT problem https://community.cisco.com/t5/network-security/asa-multiple-context-nat-problem/m-p/644899#M422698 <HTML><HEAD></HEAD><BODY><P>hi sam u would get this error when u are using a shared interface in multiple context mode. make sure to use different global addresses when using a shared interface. when using seperate interfaces in context u will not face this problem. </P><P></P><P>see ya </P><P></P><P>regards</P><P></P><P>sebastan</P><P></P></BODY></HTML> Mon, 04 Dec 2006 21:16:39 GMT https://community.cisco.com/t5/network-security/asa-multiple-context-nat-problem/m-p/644899#M422698 sebastan_bach 2006-12-04T21:16:39Z