topic Re: Deploy from CSM to ASA failed in Network Security

Deploy from CSM to ASA failed

voice1972 — Fri, 21 Feb 2020 09:13:58 GMT

Hello everbody, i'am here for the first time and i hope you can answer my question. We have an ASA-Server and the Cisco Security Manager 3.0.1. After we changed some things in the manager we want to submit and deploy the changes to the ASA-Server. Every time we will get a failure with the number 24415. The program also told us something about license failover. What can be wrong?

Re: Deploy from CSM to ASA failed

jsaturni — Thu, 12 Oct 2006 19:44:41 GMT

Hi,

Can please provide what the specific error is that follows the message...

DOWNLOAD OPERATION FAILED : 24415 : Error downloading cmd=[], response=[

The following commands failed:

If it is something about Failover, then it can be a several problems.

1. You may not have the appropriate Failover license on the devices.

2. You may not have the appropriate license level if you are attempting to do Active/Active Failover. This requires another license (FO-A/A or Unrestricted).

Hope this helps!

Thanks,

- James

Re: Deploy from CSM to ASA failed

voice1972 — Fri, 13 Oct 2006 06:09:26 GMT

Hi,

thank you for your answer. I haved presumed something like that. Now I have to talk with our customer about the licensing.

For my understanding, if we haven?t got the appropriate license level, the Deploy-function from the CSM to the ASA would not work and no changes are going to apply to the ASA?

Re: Deploy from CSM to ASA failed

jsaturni — Fri, 13 Oct 2006 15:40:25 GMT

Hi,

Yes, the ASA would prevent the configuration of Failover or Active/Active Failover if you do not have the Unrestricted or A/A Failover license.

Thanks,

- James