topic Re: Cannot access ASA from outside in Network Security

Cannot access ASA from outside

relsethagen — Fri, 21 Feb 2020 09:11:33 GMT

when I attempt to use the ADSM launcher from connecting to the outside interface of the ADSM my connection fails. I have configured the ASA to allow http connections from my IP address, are there any other steps I need to complete

Re: Cannot access ASA from outside

Fernando_Meza — Tue, 26 Sep 2006 02:24:24 GMT

Hi .. that is all you need

http server enable

http x.x.x.x 255.255.255.255 outside

where x.x.x.x is the public address that you are connecting from

Are you able to connect from inside your ASA ..?

I hope it helps .. please rate it it does !!!

Re: Cannot access ASA from outside

tech011 — Wed, 27 Sep 2006 13:35:06 GMT

I believe you can only SSH to an outside interface on a PIX/ASA. It does not matter what you have configured as far as TELNET or HTTP for access to an outside interface.

Re: Cannot access ASA from outside

kamal-learn — Thu, 28 Sep 2006 03:34:55 GMT

(for the post of tech011@charming.com )

you can access the asa from an outside interface even with telnet but the requirement here traffic must be IPsec protected.

make sure that you configured

http server enable

http your-ip-address 255.255.255.255 outside

and make sure you are using the correct ip address in the asa that configured to allow http access, or just use the hostname of the asa when your trying to access it

HTH