topic Re: ASA 5520 in Network Security https://community.cisco.com/t5/network-security/asa-5520/m-p/566769#M423719 <HTML><HEAD></HEAD><BODY><P>You need to have a exact replica of the modules in your standby unit. There is no seperate license for failover in active/standby. if you need active/active, u might need to get a security context license. By default you anyway have 2 contexts built onto the ASA box. </P><P></P><P>hope this helps.. all the best. rate replies if found useful..</P><P></P><P>Raj</P></BODY></HTML> Tue, 08 Aug 2006 06:17:22 GMT sachinraja 2006-08-08T06:17:22Z ASA 5520 https://community.cisco.com/t5/network-security/asa-5520/m-p/566768#M423718 <P>I will order Cisco ASA5520-CSC10-K9, for Anti-X and the other services bundle.</P><P>My question is, i will order another one for Active/Standby config., i think i need to order the second one as the first one (same licenses and modules).</P><P>Does the ASA5520-CSC10-K9 support Active/Standby? if yes, do i need to order special license for this (I think this is not the security context license)?</P> Fri, 21 Feb 2020 09:05:53 GMT https://community.cisco.com/t5/network-security/asa-5520/m-p/566768#M423718 a.hajhamad 2020-02-21T09:05:53Z Re: ASA 5520 https://community.cisco.com/t5/network-security/asa-5520/m-p/566769#M423719 <HTML><HEAD></HEAD><BODY><P>You need to have a exact replica of the modules in your standby unit. There is no seperate license for failover in active/standby. if you need active/active, u might need to get a security context license. By default you anyway have 2 contexts built onto the ASA box. </P><P></P><P>hope this helps.. all the best. rate replies if found useful..</P><P></P><P>Raj</P></BODY></HTML> Tue, 08 Aug 2006 06:17:22 GMT https://community.cisco.com/t5/network-security/asa-5520/m-p/566769#M423719 sachinraja 2006-08-08T06:17:22Z