topic Re: ASA 5510: Enabling a second DMZ in Network Security

ASA 5510: Enabling a second DMZ

vitute2006 — Fri, 21 Feb 2020 08:58:18 GMT

Hi:

I have just bought an ASA5510-AIP10-K9

(ASA 5510 Appliance with AIP-SSM-10, SW, 3FE, 3DES/AES) to implement perimeter security. I planned to use only 1 DMZ (plus internal and external interfaces) but things have changed, and now I need to implement a second DMZ. The ASA-5510 has 4 ports in-built but mine only 3 are available. How can I enable the fourth port (2nd DMZ)? Someone told me about a license, but I do not find info about it. Please help me.

Re: ASA 5510: Enabling a second DMZ

gfullage — Wed, 14 Jun 2006 23:00:05 GMT

The 5510 with a base license has only 3 ports enabled. You need to purchase a "Security Plus" license to enable the 4th and 5th ports.

You can either contact your resellar, partner or Cisco direct and they will be happy to sell you one 🙂 Not sure of the part number off hand.

You can see the difference between the base license and the SecPlus license on the data sheet here:

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

Re: ASA 5510: Enabling a second DMZ

vitute2006 — Thu, 15 Jun 2006 00:41:20 GMT

Thanks:

I found this license:

ASA5510-SEC-PL (ASA 5510 Security Plus License w/ A/S HA, more VLANs + conns)

Could you confirm it is OK?

Do you know how to activate this license in ASA?

Is there some procedure to do it?

Re: ASA 5510: Enabling a second DMZ

gfullage — Thu, 15 Jun 2006 01:48:20 GMT

Yep, that's looks like the right one. Basically when you purchase this you'll be given a new activation key, which you enter using the "activation-key" command in the ASA. Once that is entered you'll be running a SecPlus license.