topic Re: SNMP Setup on ASA 5520 in Network Security

SNMP Setup on ASA 5520

chrisbicm — Fri, 21 Feb 2020 08:57:59 GMT

Just wondering if anyone could provide me with basic setup or a link to basic setup for SNMP monitoring on an ASA 5520.

Thanks,

Chris

dbakula01 — Wed, 14 Jun 2006 12:11:57 GMT

snmp-server host Inside 192.168.1.185 community XXXXX

^--- sets up only host 192.168.1.185 can obtain snmp data

snmp-server community xxxxx

^--- open to everyone if you want

snmp-server location Home-Office

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

snmp-server enable traps syslog

snmp-server enable traps ipsec start stop

snmp-server enable traps entity config-change fru-insert fru-remove

snmp-server enable traps remote-access session-threshold-exceeded

that should be most of what you need

chrisbicm — Wed, 14 Jun 2006 12:22:51 GMT

That was exactly what I was looking for thanks.

kotek — Thu, 15 Jun 2006 06:55:54 GMT

Hi all

sometimes you have to split poll access and trap access, like this

for polling

snmp-server host Inside 192.168.1.185 poll community XXXXX

for traps

snmp-server host Inside 192.168.1.181 trap community YYYYY