https://community.cisco.com/t5/network-security/firepower-9300-ftd-image-supports-mpls-pass-through/m-p/3085154#M42656 <P>I don't know for sure. You would probably have to open a TAC case to verify (or ask your reseller to open a Partner Help case if this is pre-sales).</P> <P>I would expect it to require the same modification to the underlying LINA code just like an ASA firewall configuration requires. i.e., like what is described here:</P> <P>https://supportforums.cisco.com/document/95341/quick-reference-bgp-pass-through</P> <P>We do things like that in an FTD device currently using Flexconfigs.</P> <P>http://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/flexconfig_policies.html#reference_ztv_qvw_yx</P> <P>While the specific command is not blacklisted, I have heard some collegues report that not all of the "connection" settings are configurable in FTD.</P> Fri, 14 Jul 2017 04:56:37 GMT Marvin Rhoads 2017-07-14T04:56:37Z https://community.cisco.com/t5/network-security/firepower-9300-ftd-image-supports-mpls-pass-through/m-p/3085153#M42655 <P>Hi Experts</P> <P></P> <P>Does the FPR 9300 running FTD image 6.x pass MPLS traffic in routed mode? In case we have two different ASs, peering on MP-eBGP with inter-AS option B and a FPR device in between, will the FPR allow labelled eBGP to come up and exchange traffic? Will state-ful packet inspection work in this case, along with IPS policies?</P> <P></P> <P></P> <P>Regards,</P> <P>Sumanta.</P> Sun, 10 Mar 2019 13:53:16 GMT https://community.cisco.com/t5/network-security/firepower-9300-ftd-image-supports-mpls-pass-through/m-p/3085153#M42655 Sumanta Ghosh 2019-03-10T13:53:16Z https://community.cisco.com/t5/network-security/firepower-9300-ftd-image-supports-mpls-pass-through/m-p/3085154#M42656 <P>I don't know for sure. You would probably have to open a TAC case to verify (or ask your reseller to open a Partner Help case if this is pre-sales).</P> <P>I would expect it to require the same modification to the underlying LINA code just like an ASA firewall configuration requires. i.e., like what is described here:</P> <P>https://supportforums.cisco.com/document/95341/quick-reference-bgp-pass-through</P> <P>We do things like that in an FTD device currently using Flexconfigs.</P> <P>http://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/flexconfig_policies.html#reference_ztv_qvw_yx</P> <P>While the specific command is not blacklisted, I have heard some collegues report that not all of the "connection" settings are configurable in FTD.</P> Fri, 14 Jul 2017 04:56:37 GMT https://community.cisco.com/t5/network-security/firepower-9300-ftd-image-supports-mpls-pass-through/m-p/3085154#M42656 Marvin Rhoads 2017-07-14T04:56:37Z