topic Re: ASA 5520: Active/passive failover with LAN Based Interface in Network Security https://community.cisco.com/t5/network-security/asa-5520-active-passive-failover-with-lan-based-interface/m-p/654872#M426942 <HTML><HEAD></HEAD><BODY><P>which verison of IOS software are you using</P><P>Try these links:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008045247e.html#wp1096075" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008045247e.html#wp1096075</A></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/conf_gd/general/failover.htm#wp1142481" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/conf_gd/general/failover.htm#wp1142481</A></P></BODY></HTML> Tue, 31 Oct 2006 14:58:32 GMT 2006-10-31T14:58:32Z ASA 5520: Active/passive failover with LAN Based Interface https://community.cisco.com/t5/network-security/asa-5520-active-passive-failover-with-lan-based-interface/m-p/654871#M426941 <P>I configure the LAN Based Interface on the ASA and when i do the test, i have only two packets lost with a ping to an @ on the other hand of the ASA interfaces without the OUTSIDE interface.</P><P></P><P>On the OUTSIDE interface, the trafic restart when the two ASA is start completely.</P><P></P><P>When I do a "show fail", all the interfaces are monitoring.</P><P></P><P>The configuration for the failover is global.</P><P></P><P>What can be the problem and how i can resolve it ?</P><P></P><P>Thank you</P> Fri, 21 Feb 2020 09:15:48 GMT https://community.cisco.com/t5/network-security/asa-5520-active-passive-failover-with-lan-based-interface/m-p/654871#M426941 ousseynou.sow 2020-02-21T09:15:48Z Re: ASA 5520: Active/passive failover with LAN Based Interface https://community.cisco.com/t5/network-security/asa-5520-active-passive-failover-with-lan-based-interface/m-p/654872#M426942 <HTML><HEAD></HEAD><BODY><P>which verison of IOS software are you using</P><P>Try these links:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008045247e.html#wp1096075" target="_blank">http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008045247e.html#wp1096075</A></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/conf_gd/general/failover.htm#wp1142481" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/conf_gd/general/failover.htm#wp1142481</A></P></BODY></HTML> Tue, 31 Oct 2006 14:58:32 GMT https://community.cisco.com/t5/network-security/asa-5520-active-passive-failover-with-lan-based-interface/m-p/654872#M426942 2006-10-31T14:58:32Z