topic Re: ASA route inside in Network Security

ASA route inside

llotobias — Fri, 21 Feb 2020 09:36:16 GMT

I want to add an internet routable address that points to my inside interface but the ASA is automaticaly converting the first octect to a non routable address is there a way to prevent this?

Re: ASA route inside

timkaye — Wed, 11 Jul 2007 02:39:39 GMT

Sounds interesting.

Sounds silly but are you making sure the command is

route inside x.x.x.x 255.255.255.0 ip.of.inside.gateway

Where "inside" is the name of your internal interface?

Re: ASA route inside

llotobias — Wed, 11 Jul 2007 15:09:20 GMT

Yes I checked to make sure all the parameters are entered correctly. The first octet is 208.x.x.x when I hit return the do not get an error or warning but when I do a show run route it has changed the 208.x.x.x to 192.x.x.x.

Re: ASA route inside

ggilbert — Wed, 11 Jul 2007 15:43:13 GMT

What version of code are you running on the ASA?

Can you send me the exact IP address you are trying to enter, please. I tried in the lab, it doesn't change.

Thanks

Gilbert

Re: ASA route inside

llotobias — Wed, 11 Jul 2007 15:57:37 GMT

I am running 7.2 this is what I am entering ?route inside 208.177.125.146 225.255.255.255 10.64.2.1? and this is what it show in the running config ?route inside 192.177.125.146 225.255.255.255 10.64.2.1?

Re: ASA route inside

ggilbert — Wed, 11 Jul 2007 16:07:03 GMT

Ok - there is another digit after 7.2.

Can you send me the sh version from the ASA please.

Thanks

gilbert

Re: ASA route inside

ggilbert — Wed, 11 Jul 2007 16:09:20 GMT

I tried it here, it works well.

Would it be possible that you can please send me the config of the ASA as well.

Thanks

gilbert

Re: ASA route inside

llotobias — Wed, 11 Jul 2007 16:20:23 GMT

Cisco Adaptive Security Appliance Software Version 7.2(2)

Device Manager Version 5.2(2)

sorry can not send config.