https://community.cisco.com/t5/network-security/fp-4120-inline-set-bypass/m-p/3073784#M42942 <P>on the Cisco Firepower 4120 appliance under the inline set option what does standby option mean for bypass ?</P> <P></P> <P>per cisco documentation</P> <P></P> <P>Set Hardware Bypass to the standby state on supported interfaces. Only pairs of Hardware<BR />Bypass interfaces are shown. In the standby state, the interfaces remain in normal operation until there<BR />is a trigger event.</P> <P></P> <P>so what happens when there is a trigger event ?</P> Sun, 10 Mar 2019 13:49:32 GMT Tejas Kunte 2019-03-10T13:49:32Z https://community.cisco.com/t5/network-security/fp-4120-inline-set-bypass/m-p/3073784#M42942 <P>on the Cisco Firepower 4120 appliance under the inline set option what does standby option mean for bypass ?</P> <P></P> <P>per cisco documentation</P> <P></P> <P>Set Hardware Bypass to the standby state on supported interfaces. Only pairs of Hardware<BR />Bypass interfaces are shown. In the standby state, the interfaces remain in normal operation until there<BR />is a trigger event.</P> <P></P> <P>so what happens when there is a trigger event ?</P> Sun, 10 Mar 2019 13:49:32 GMT https://community.cisco.com/t5/network-security/fp-4120-inline-set-bypass/m-p/3073784#M42942 Tejas Kunte 2019-03-10T13:49:32Z