topic Re: it took around 9 to 12 min to in Network Security

firepower unable to add on firesight

aazmi — Fri, 21 Feb 2020 13:40:53 GMT

hi,

i have a ASA-5512x with firepower and firesight. but unable to add firepower on firesight. can ssh firepower from firesight.

any advice.

regards

Aazmi

Probably you did something

Karsten Iwen — Wed, 06 Jan 2016 10:09:42 GMT

Probably you did something wrong ...

What did you exactly do (both on FP and on FS) and what are the error messages?

i got the below message ;

aazmi — Wed, 06 Jan 2016 12:33:50 GMT

i got the below message ;

"Could not establish a connection with sensor. Make sure the registration keys match, that the software versions are compatible, and that the network is not blocking the connection."

I have firesight ;

aazmi — Wed, 06 Jan 2016 12:38:01 GMT

I have firesight ;

Software Version	5.4.0 (build 763)
OS	Sourcefire Linux OS 5.4.0 (build126)

and firepower

Sourcefire Linux OS v5.4.0 (build 127)
Sourcefire ASA5512 v5.4.0 (build 764)

I would first update

Karsten Iwen — Wed, 06 Jan 2016 12:44:11 GMT

I would first update FireSight to the newest 5.4.x pactchlevel.

Is the output of "show managers" on FP matching your setup?

on firepower

aazmi — Wed, 06 Jan 2016 12:47:58 GMT

on firepower

show managers
Host                      : 10.203.5.122
Registration Key          : cisco
Registration              : pending
RPC Status                :

on firesight

same on firesight

i tried to update but at 19%

aazmi — Thu, 07 Jan 2016 13:22:10 GMT

i tried to update but at 19% it failed. please help in this regard.

How long did you wait? And

Karsten Iwen — Thu, 07 Jan 2016 13:49:55 GMT

How long did you wait? And how did it fail exactly?

it took around 9 to 12 min to

aazmi — Thu, 07 Jan 2016 14:01:17 GMT

it took around 9 to 12 min to reach 19%, retry few time and then got the message of failed.

Hi

hdoramane — Tue, 16 Feb 2016 15:45:05 GMT

I have the same problem when I try to add ASA5506 Firepower to FSM Virtual Appliance on version 6.0.0 (build 1005)

I tried with the version FSM 5.4.0 when I try to patch any version 5.4.1 or 5.4.1.3 it's fails in 7%

Any idea to resolve this problem? I reimage twice my ASA but no way

Thanks

regards

Re: it took around 9 to 12 min to

Naeimy021 — Mon, 02 Oct 2017 14:04:38 GMT

Hi,

Did anyone find a solution, I'm experiencing the same issue while adding the firepower module to Firesight.

Re: it took around 9 to 12 min to

Marvin Rhoads — Mon, 02 Oct 2017 14:54:47 GMT

Please tell us the details of your issue or start a new discussion.

There are several different issues mentioned in this thread already.