topic I have already provided them in Network Security

IPS interface configuration

Sec_guy — Sun, 10 Mar 2019 13:45:30 GMT

Hello all,

I have the following topology and I wonder if i can configure L1 with L2 as inline interface pair and L1 with L3 again as a different pair..

Can I do that ? how ?

because I only have 3 interfaces and want to configure as shown in topology

Note : IPS is Firepower 7125 appliance

You can't place them in

Claudiu Cismaru — Thu, 26 Jan 2017 13:10:36 GMT

You can't place them in inline mode, the way you want. But you can create a virtual switch.

How to create a virtual

Sec_guy — Thu, 26 Jan 2017 14:16:18 GMT

How to create a virtual switch ? can u help with the config.

I actually have more than L2 and L3, and only one Link going to the internal Firewall/Router, so I need a simple way to get it work like this

Thank you

http://www.cisco.com/c/en/us

Claudiu Cismaru — Fri, 27 Jan 2017 07:55:14 GMT

http://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Setting_Up_Virtual_Switches.html

Check the docs. Also, you can use the contextual documentation on the FMC directly.

Or, you can download the PDF documentation.

Thank you,

Sec_guy — Fri, 27 Jan 2017 11:37:19 GMT

Thank you,

But can I do this using Cisco IDM ? because I could not find these options?

Are you managing a Firepower

Claudiu Cismaru — Fri, 27 Jan 2017 11:49:49 GMT

Are you managing a Firepower 7125 from IDM? Is it possible? Or are you talking about FMC?

Actually I am trying it on

Sec_guy — Fri, 27 Jan 2017 18:42:19 GMT

Actually I am trying it on GNS for the moment, but in the real world I have Firepower 7125, Is it possible to manage it with IDM? I don`t have FMC, Does it require License ?

A FP 7125 can't be on box

Claudiu Cismaru — Sun, 29 Jan 2017 13:37:40 GMT

A FP 7125 can't be on box managed. Nor through IDM. You have to use an FMC to manage it.

FMC 6.1 is free and the base licenses (protect and control) for FP 7125 comes automatically when you buy it.

Any updates ?!

Sec_guy — Mon, 30 Jan 2017 08:18:20 GMT

Any updates ?!

I have already provided them

Claudiu Cismaru — Mon, 30 Jan 2017 08:32:27 GMT

I have already provided them to you. See my yesterday's message.

If you didn't get an email, it seems that by default this system no longer shows the comments. It seems to be a problem with it.