topic I was unable to located a bug in Network Security

Guest reauthentication problem in Endpoints Using Cisco ISE

john Kgorutle — Fri, 21 Feb 2020 13:47:24 GMT

Hi,

Guest are keeps on prompting for authentication after 5 minutes. I have enable re-authentication from the server. please help:

switchport access vlan xx
switchport mode access
switchport nonegotiate
authentication control-direction in
authentication event fail action next-method
authentication event server dead action authorize vlan xx
authentication event no-response action authorize vlan xx
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order mab dot1x webauth
authentication priority dot1x mab webauth
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
snmp trap mac-notification change added
snmp trap mac-notification change removed
dot1x pae authenticator
dot1x timeout tx-period 5
dot1x max-reauth-req 5
spanning-tree portfast
spanning-tree bpduguard enable

What attributes are you

nspasov — Sun, 10 Apr 2016 23:46:52 GMT

What attributes are you returning with the Authorization Profile for the guest clients?

Thank you for rating helpful posts!

Session-Timeout 28800

john Kgorutle — Thu, 21 Apr 2016 12:01:54 GMT

Session-Timeout

28800

Hmm, that should be ok. What

nspasov — Thu, 21 Apr 2016 16:06:25 GMT

Hmm, that should be ok. What model and version of code is the switch that you are testing this with?

cat4500e-ENTSERVICESK9-M),

john Kgorutle — Fri, 22 Apr 2016 05:26:21 GMT

cat4500e-ENTSERVICESK9-M), Version 15.2(2)E3

I was unable to located a bug

nspasov — Mon, 25 Apr 2016 16:34:57 GMT

I was unable to located a bug/defect for that version of code. So I would suggest that you reach out to TAC for further investigation. Let us know of the outcome 🙂

Thank you for rating helpful posts!