https://community.cisco.com/t5/network-security/accessing-cisco-4345-ips-via-web-interface/m-p/2972056#M43390 <P>Every guide on IPS configuration I've seen suggests that I use the web interface and implies that it should be up and running after initial setup. I can access a new 4345 IPS by ssh, but I have no success accessing it by <A href="https://ip/" target="_blank">https://ip</A> address.</P> <P>I've captured some packets and saw that the IPS didn't return Server Hello response, but tcp handshake went alright.</P> <P>Here are some parts of the config:</P> <P>IPS-02# conf t</P> <P>IPS-02(config)# service web-server</P> <P>IPS-02(config-web)# show settings</P> <P>enable-tls: true</P> <P>port: 443</P> <P>server-id: HTTP/1.1 compliant</P> <P>configurable-service (min: 0, max: 99, current: 0)</P> <HR /><HR /> <P>Please point me to what I might be missing.</P> Sun, 10 Mar 2019 13:43:32 GMT pzagumen1 2019-03-10T13:43:32Z https://community.cisco.com/t5/network-security/accessing-cisco-4345-ips-via-web-interface/m-p/2972056#M43390 <P>Every guide on IPS configuration I've seen suggests that I use the web interface and implies that it should be up and running after initial setup. I can access a new 4345 IPS by ssh, but I have no success accessing it by <A href="https://ip/" target="_blank">https://ip</A> address.</P> <P>I've captured some packets and saw that the IPS didn't return Server Hello response, but tcp handshake went alright.</P> <P>Here are some parts of the config:</P> <P>IPS-02# conf t</P> <P>IPS-02(config)# service web-server</P> <P>IPS-02(config-web)# show settings</P> <P>enable-tls: true</P> <P>port: 443</P> <P>server-id: HTTP/1.1 compliant</P> <P>configurable-service (min: 0, max: 99, current: 0)</P> <HR /><HR /> <P>Please point me to what I might be missing.</P> Sun, 10 Mar 2019 13:43:32 GMT https://community.cisco.com/t5/network-security/accessing-cisco-4345-ips-via-web-interface/m-p/2972056#M43390 pzagumen1 2019-03-10T13:43:32Z