topic 802.1x access points using ISE for trigger in Network Security https://community.cisco.com/t5/network-security/802-1x-access-points-using-ise-for-trigger/m-p/2158089#M433999 <HTML><HEAD></HEAD><BODY><P> Hello,</P><P></P><P>Please check this link for "802.1x using Cisco ISE", it may help you in this.</P><P></P><P><A _jive_internal="true" href="https://community.cisco.com/docs/DOC-29409">https://supportforums.cisco.com/docs/DOC-29409</A></P></BODY></HTML> Thu, 16 May 2013 16:03:07 GMT Naveen Kumar 2013-05-16T16:03:07Z 802.1x access points using ISE for trigger https://community.cisco.com/t5/network-security/802-1x-access-points-using-ise-for-trigger/m-p/2158088#M433998 <P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; We are deploying AP's with 802.1x ports. We do not want ot have static AP ports. When plugged into a switch port with 802.1x configured the AP does not kick up the smart port trigger. How do I link the trigger from ISE to send the response for the trigger on the swutch to reconfigure the switchport for an AP?</P><P></P><P>thanks, </P> Fri, 21 Feb 2020 12:51:59 GMT https://community.cisco.com/t5/network-security/802-1x-access-points-using-ise-for-trigger/m-p/2158088#M433998 jerry.larson 2020-02-21T12:51:59Z 802.1x access points using ISE for trigger https://community.cisco.com/t5/network-security/802-1x-access-points-using-ise-for-trigger/m-p/2158089#M433999 <HTML><HEAD></HEAD><BODY><P> Hello,</P><P></P><P>Please check this link for "802.1x using Cisco ISE", it may help you in this.</P><P></P><P><A _jive_internal="true" href="https://community.cisco.com/docs/DOC-29409">https://supportforums.cisco.com/docs/DOC-29409</A></P></BODY></HTML> Thu, 16 May 2013 16:03:07 GMT https://community.cisco.com/t5/network-security/802-1x-access-points-using-ise-for-trigger/m-p/2158089#M433999 Naveen Kumar 2013-05-16T16:03:07Z