topic LOGIN the ISE server with explorer in Network Security https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883067#M434156 <HTML><HEAD></HEAD><BODY><P> The Cisco ISE GUI is supported on HTTPS-enabled Mozilla Firefox version&nbsp; 3.x and Microsoft Internet Explorer version 8 (in Internet Explorer&nbsp; 8-only mode). </P><P></P><HR /><P></P><P><A name="wp1070978"></A> </P><P> <STRONG>Note </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="1" />Cisco ISE GUI is not supported on Internet Explorer version 8 running in Internet Explorer 7 compatibility mode. </P><P></P><HR /><P></P><P><A name="wp1070982"></A> </P><P> After you have installed Cisco ISE, you can log into Cisco ISE as described:</P><P></P><P><A name="wp1070916"></A> </P><P> To log into the Cisco ISE GUI, complete the following steps: </P><P></P><HR noshade="noshade" /><P></P><P><A name="wp1058034"></A> </P><P> <STRONG>Step 1 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" /><SPAN>Enter the ISE URL in the address bar of your browser (for example, </SPAN><A class="jive-link-external-small" href="https://">https://</A><SPAN><ISE hostname="" or="" ip="" address="">/admin/). </ISE></SPAN></P><P></P><P><A name="wp1071207"></A> </P><P> The ISE login window appears. </P><P></P><P><A name="wp1071174"></A> </P><P> <STRONG>Step 2 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Enter <STRONG>admin</STRONG> in the Username field. </P><P></P><P><A name="wp1058139"></A> </P><P> <STRONG>Step 3 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Enter <STRONG>cisco</STRONG> in the Password field. This value is case-sensitive. </P><P></P><P><IMG src="http://www.cisco.com/en/US/i/templates/note.gif" /></P><HR /><P></P><P><A name="wp1071253"></A> </P><P> <STRONG>Note </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="6" /><STRONG>admin</STRONG> and <STRONG>cisco</STRONG> are the default values for the username and password that you must use to access the ISE user interface for the first time. </P><P></P><HR /><P><A name="wp1068735"></A> </P><P> <STRONG>Step 4 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Click <STRONG>Login</STRONG> or press <STRONG>Enter</STRONG>. </P><P></P><P><A name="wp1061533"></A> </P><P> If your login is successful, you will be prompted to change your password. </P><P></P><P><A name="wp1091312"></A> </P><P> <STRONG>Step 5 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Enter your new password and re-enter it for confirmation. </P><P></P><P><A name="wp1091301"></A> </P><P> You can now access the menus in the ISE user interface. </P><P></P><P>For more infor:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_admin.html">http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_admin.html</A></P><P></P><P></P><P>Regards,</P><P>Jatin</P><P></P><P></P><P>-Do rate helpful posts.</P></BODY></HTML> Thu, 17 May 2012 08:09:09 GMT Jatin Katyal 2012-05-17T08:09:09Z LOGIN the ISE server with explorer https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883066#M434152 <P>hi ,yesterday I installed&nbsp; a ISE in VM server with ESX4.1,I can login the ise with the user I build it in CLI ,but I can't login it with IEor FIREFOX user the same user,why?</P> Fri, 21 Feb 2020 12:38:39 GMT https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883066#M434152 csco11224163 2020-02-21T12:38:39Z LOGIN the ISE server with explorer https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883067#M434156 <HTML><HEAD></HEAD><BODY><P> The Cisco ISE GUI is supported on HTTPS-enabled Mozilla Firefox version&nbsp; 3.x and Microsoft Internet Explorer version 8 (in Internet Explorer&nbsp; 8-only mode). </P><P></P><HR /><P></P><P><A name="wp1070978"></A> </P><P> <STRONG>Note </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="1" />Cisco ISE GUI is not supported on Internet Explorer version 8 running in Internet Explorer 7 compatibility mode. </P><P></P><HR /><P></P><P><A name="wp1070982"></A> </P><P> After you have installed Cisco ISE, you can log into Cisco ISE as described:</P><P></P><P><A name="wp1070916"></A> </P><P> To log into the Cisco ISE GUI, complete the following steps: </P><P></P><HR noshade="noshade" /><P></P><P><A name="wp1058034"></A> </P><P> <STRONG>Step 1 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" /><SPAN>Enter the ISE URL in the address bar of your browser (for example, </SPAN><A class="jive-link-external-small" href="https://">https://</A><SPAN><ISE hostname="" or="" ip="" address="">/admin/). </ISE></SPAN></P><P></P><P><A name="wp1071207"></A> </P><P> The ISE login window appears. </P><P></P><P><A name="wp1071174"></A> </P><P> <STRONG>Step 2 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Enter <STRONG>admin</STRONG> in the Username field. </P><P></P><P><A name="wp1058139"></A> </P><P> <STRONG>Step 3 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Enter <STRONG>cisco</STRONG> in the Password field. This value is case-sensitive. </P><P></P><P><IMG src="http://www.cisco.com/en/US/i/templates/note.gif" /></P><HR /><P></P><P><A name="wp1071253"></A> </P><P> <STRONG>Note </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="6" /><STRONG>admin</STRONG> and <STRONG>cisco</STRONG> are the default values for the username and password that you must use to access the ISE user interface for the first time. </P><P></P><HR /><P><A name="wp1068735"></A> </P><P> <STRONG>Step 4 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Click <STRONG>Login</STRONG> or press <STRONG>Enter</STRONG>. </P><P></P><P><A name="wp1061533"></A> </P><P> If your login is successful, you will be prompted to change your password. </P><P></P><P><A name="wp1091312"></A> </P><P> <STRONG>Step 5 </STRONG><IMG border="0" height="2" src="http://www.cisco.com/en/US/i/templates/blank.gif" width="5" />Enter your new password and re-enter it for confirmation. </P><P></P><P><A name="wp1091301"></A> </P><P> You can now access the menus in the ISE user interface. </P><P></P><P>For more infor:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_admin.html">http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_admin.html</A></P><P></P><P></P><P>Regards,</P><P>Jatin</P><P></P><P></P><P>-Do rate helpful posts.</P></BODY></HTML> Thu, 17 May 2012 08:09:09 GMT https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883067#M434156 Jatin Katyal 2012-05-17T08:09:09Z LOGIN the ISE server with explorer https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883068#M434164 <HTML><HEAD></HEAD><BODY><P> hi ,I have not been notes the default user ,but I will try it later ,thanks </P></BODY></HTML> Thu, 17 May 2012 12:00:54 GMT https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883068#M434164 csco11224163 2012-05-17T12:00:54Z LOGIN the ISE server with explorer https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883069#M434169 <HTML><HEAD></HEAD><BODY><P>Sure and do let us know how it goes.</P><P></P><P>-Jatin</P></BODY></HTML> Mon, 21 May 2012 12:16:07 GMT https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883069#M434169 Jatin Katyal 2012-05-21T12:16:07Z LOGIN the ISE server with explorer https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883070#M434176 <HTML><HEAD></HEAD><BODY><P> I am so sorry for reply this so long time ,I try to reinstall the ISE ande set the admin account different with "admin",But I just LOGIN the ISE with the account ,and without any&nbsp; promote to change the account.Now I can use the ISE normally.Thanks again.</P></BODY></HTML> Wed, 06 Jun 2012 03:24:05 GMT https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883070#M434176 csco11224163 2012-06-06T03:24:05Z LOGIN the ISE server with explorer https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883071#M434180 <HTML><HEAD></HEAD><BODY><P>No worries. If it's resolved, I would appreciate if you can mark this thread resolved so that other's can benefit from it.</P><P></P><P>Regards,</P><P>Jatin</P></BODY></HTML> Fri, 08 Jun 2012 14:15:11 GMT https://community.cisco.com/t5/network-security/login-the-ise-server-with-explorer/m-p/1883071#M434180 Jatin Katyal 2012-06-08T14:15:11Z