Unable to add ISE as a mitigation device...

dgaikwad — Sun, 10 Mar 2019 13:42:37 GMT

Hi All,

I am using ISE 2.1 along with Stealthwatch 6.7.1

I am working on configuring the ISE and Stealthwatch integration, referring the document, https://communities.cisco.com/community/technology/security/pa/ise/blog/2016/06/26/ise-21-and-stealthwatch-integration-via-self-sign-certs

Was able to complete the steps till the addition of Mitigation nodes.. that is where its throwing the error, stating: "The connection to the ISE mitigation node(s) has failed. Please ensure the IP address is correct and the ISE mitigation node(s) is available on the network."

I have made configuration of DNS entries, time sync, verified the reachability between ISE and Stealthwatch.

Not sure what I am missing here and where to move ahead, any pointers or has anyone faced this similar issue?

Thank you,

Hello,

yualme — Fri, 23 Dec 2016 16:32:53 GMT

Hello,

Which license do we need in Stealthwatch 6.7.1 to intigrate it with ISE as for me it says you need additional license

Yes, you do need another

dgaikwad — Thu, 01 Jun 2017 13:13:43 GMT

Yes, you do need another license to allow to integrate it to ISE;

The license is just named as ISE, that is what I see in the license details as well...
Attached is the image

topic Unable to add ISE as a mitigation device... in Network Security

Unable to add ISE as a mitigation device...

Hello,

Yes, you do need another