topic FWSM NAT Error in Network Security https://community.cisco.com/t5/network-security/fwsm-nat-error/m-p/1999410#M435245 <HTML><HEAD></HEAD><BODY><P>Seems like you are ping ing it with incorrect interface.</P><P></P><P>Your first attempt uses "ext" interface, and the unsuccessful attempt is using "tr_fwsm" interface.</P></BODY></HTML> Fri, 01 Jun 2012 05:48:59 GMT Jennifer Halim 2012-06-01T05:48:59Z FWSM NAT Error https://community.cisco.com/t5/network-security/fwsm-nat-error/m-p/1999409#M435244 <P>After I finished my configuration for my FWSM, I cannot access to the outside. what do i wrong?</P><P></P><P>FWSM/pri/act(config)# ping</P><P>Interface: ext</P><P>Target IP address: 194.25.2.129</P><P>Repeat count: [5] </P><P>Datagram size: [100] </P><P>Timeout in seconds: [2] </P><P>Extended commands [n]: </P><P>Sweep range of sizes [n]: </P><P>Sending 5, 100-byte ICMP Echos to 194.25.2.129, timeout is 2 seconds:</P><P>!!!!!</P><P>Success rate is 100 percent (5/5), round-trip min/avg/max = 10/12/20 ms</P><P>FWSM/pri/act(config)# </P><P>FWSM/pri/act(config)# ping</P><P>Interface: tr_fwsm</P><P>Target IP address: 194.25.2.129</P><P>Repeat count: [5] </P><P>Datagram size: [100] </P><P>Timeout in seconds: [2] </P><P>Extended commands [n]: </P><P>Sweep range of sizes [n]: </P><P>Sending 5, 100-byte ICMP Echos to 194.25.2.129, timeout is 2 seconds:</P><P>?????</P><P>Success rate is 0 percent (0/5)</P> Mon, 11 Mar 2019 23:14:09 GMT https://community.cisco.com/t5/network-security/fwsm-nat-error/m-p/1999409#M435244 alexander.cario 2019-03-11T23:14:09Z FWSM NAT Error https://community.cisco.com/t5/network-security/fwsm-nat-error/m-p/1999410#M435245 <HTML><HEAD></HEAD><BODY><P>Seems like you are ping ing it with incorrect interface.</P><P></P><P>Your first attempt uses "ext" interface, and the unsuccessful attempt is using "tr_fwsm" interface.</P></BODY></HTML> Fri, 01 Jun 2012 05:48:59 GMT https://community.cisco.com/t5/network-security/fwsm-nat-error/m-p/1999410#M435245 Jennifer Halim 2012-06-01T05:48:59Z