topic FWSM with two outside in Network Security

FWSM with two outside

Ali Koussan — Mon, 11 Mar 2019 23:12:10 GMT

Hi ,

I have FWSM with two outside interfaces , is there a way to configure two static route one primary to the first outside , and the other is backup ?

I have read this document , https://supportforums.cisco.com/docs/DOC-12015 It use the command " route-monitor" , but one outside with two gateways in the same subnet .

I tried the same command in my scenario , but I could not add two routes to the same destination pointing to two different gateways in two different subnet .

Also sLA monitor is not supported on FWSM , is there any solution for this scenario ?

Ali

Sent from Cisco Technical Support iPad App

FWSM with two outside

Jennifer Halim — Sun, 27 May 2012 01:58:55 GMT

No unfortunately that is not supported on FWSM.

And you are right, the route-monitor is only supported on the same outside interface, not 2 different outside interfaces.

FWSM with two outside

Ali Koussan — Tue, 29 May 2012 06:53:03 GMT

Thanks Jennifer ,

What about the new ASA Module , I heard that it supports SLA monitor ..

Ali

FWSM with two outside

Jennifer Halim — Tue, 29 May 2012 07:51:08 GMT

Yes, the new ASA-SM does support SLA monitor.

Here is the config guide for the ASA-SM for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration85/guide/route_static.html#wp1119813