https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873540#M436698 <P>This is likely a very basic question....</P><P></P><P>I've got a new Cisco ASA5505 and I'm trying to see some logs at console level. Currently when I do a sh logging I simply get the below. I was expecting or I have seen on other PIX/ASA's system messages.</P><P></P><P>Any ideas on what command I need to run in order to enable these messages?</P><P></P><P></P><P>mipsasa01# sh logging</P><P>Syslog logging: enabled</P><P> Facility: 20</P><P> Timestamp logging: disabled</P><P> Standby logging: disabled</P><P> Deny Conn when Queue Full: disabled</P><P> Console logging: disabled</P><P> Monitor logging: disabled</P><P> Buffer logging: disabled</P><P> Trap logging: disabled</P><P> History logging: disabled</P><P> Device ID: disabled</P><P> Mail logging: disabled</P><P> ASDM logging: level informational, 7108 messages logged</P> Fri, 21 Feb 2020 09:48:24 GMT starkhorn 2020-02-21T09:48:24Z https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873540#M436698 <P>This is likely a very basic question....</P><P></P><P>I've got a new Cisco ASA5505 and I'm trying to see some logs at console level. Currently when I do a sh logging I simply get the below. I was expecting or I have seen on other PIX/ASA's system messages.</P><P></P><P>Any ideas on what command I need to run in order to enable these messages?</P><P></P><P></P><P>mipsasa01# sh logging</P><P>Syslog logging: enabled</P><P> Facility: 20</P><P> Timestamp logging: disabled</P><P> Standby logging: disabled</P><P> Deny Conn when Queue Full: disabled</P><P> Console logging: disabled</P><P> Monitor logging: disabled</P><P> Buffer logging: disabled</P><P> Trap logging: disabled</P><P> History logging: disabled</P><P> Device ID: disabled</P><P> Mail logging: disabled</P><P> ASDM logging: level informational, 7108 messages logged</P> Fri, 21 Feb 2020 09:48:24 GMT https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873540#M436698 starkhorn 2020-02-21T09:48:24Z https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873541#M436699 <HTML><HEAD></HEAD><BODY><P>The "show log" displays what is known as the buffer log. Your buffer logging is disabled. Use the config cmd "logging buffered <LEVEL>" to enable it. You can adjust the size of the buffer with "logging buffer-size <BYTES>". I think the buffer space is allocated in memory so don't go overboard.</BYTES></LEVEL></P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/l2.html#wp1729451" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/l2.html#wp1729451</A></P><P></P></BODY></HTML> Thu, 22 Nov 2007 23:23:34 GMT https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873541#M436699 GRAEME DANIELSON 2007-11-22T23:23:34Z https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873542#M436700 <HTML><HEAD></HEAD><BODY><P>Great, many thanks for your help.</P></BODY></HTML> Sun, 25 Nov 2007 19:49:48 GMT https://community.cisco.com/t5/network-security/cisco-asa5505-logging/m-p/873542#M436700 starkhorn 2007-11-25T19:49:48Z