topic pix 525 subinterfaces in Network Security https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906758#M437763 <HTML><HEAD></HEAD><BODY><P>port status is up, so the interface is running, on switch side as well</P><P></P><P>i just don't see any options to make the interface ready for subinterface action</P></BODY></HTML> Thu, 03 May 2012 16:09:47 GMT axeleratorcisco 2012-05-03T16:09:47Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906755#M437758 <P>i have a pix 525 running 8.0(4) and asdm 6.1(5)</P><P></P><P>i have two ethernet interfaces, and two gb ethernet interfaces</P><P></P><P>i connected both gb ethernet interfaces to a switchport, configured as trunk</P><P></P><P>can't seem to activate subinterfaces on the gb interface on the pix 525</P><P></P><P>anyone know how to activate this?</P><P></P><P>firewall mode is routed, and single context</P> Tue, 26 Mar 2019 00:48:30 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906755#M437758 axeleratorcisco 2019-03-26T00:48:30Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906756#M437759 <HTML><HEAD></HEAD><BODY><P>Have you configured the subinterfaces with the respective vlans? What is the status of the port on the Pix? </P><P></P><P>Mike </P></BODY></HTML> Thu, 03 May 2012 15:22:08 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906756#M437759 Maykol Rojas 2012-05-03T15:22:08Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906757#M437760 <HTML><HEAD></HEAD><BODY><P>no only on the switch side</P><P></P><P>on my asa's i can tag a box which says vlan / subinterface</P><P></P><P>on the pix i don't see this option</P><P></P><P>switch side is trunk, so i am ready to push vlans to the pix but i don't see any option in asdm under G0 and G1 interface</P><P></P><P>any idea?</P></BODY></HTML> Thu, 03 May 2012 16:02:53 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906757#M437760 axeleratorcisco 2012-05-03T16:02:53Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906758#M437763 <HTML><HEAD></HEAD><BODY><P>port status is up, so the interface is running, on switch side as well</P><P></P><P>i just don't see any options to make the interface ready for subinterface action</P></BODY></HTML> Thu, 03 May 2012 16:09:47 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906758#M437763 axeleratorcisco 2012-05-03T16:09:47Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906759#M437764 <HTML><HEAD></HEAD><BODY><P>You dont need to, as long as you have the following config </P><P></P><P>Interface gig0/1.10</P><P> vlan 10</P><P>&nbsp; ip add x.x.x.x</P><P>&nbsp; security-level x </P><P></P><P>And the main interface up, everything should be fine. </P><P></P><P>Mike </P></BODY></HTML> Thu, 03 May 2012 16:14:54 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906759#M437764 Maykol Rojas 2012-05-03T16:14:54Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906760#M437765 <HTML><HEAD></HEAD><BODY><P> i see</P><P></P><P>how do i apply this from within asdm?</P></BODY></HTML> Fri, 04 May 2012 06:25:13 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906760#M437765 axeleratorcisco 2012-05-04T06:25:13Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906761#M437766 <HTML><HEAD></HEAD><BODY><P> i got it</P><P></P><P>clicking on the main interface and viewing properties doesn't work</P><P></P><P>you will need to ADD an interface from asdm, there you can specify on which main interface you want it</P><P></P><P>and then you can add the vlan id / subinterface identifier</P><P></P><P>thanks for the help&nbsp;&nbsp;&nbsp;&nbsp; </P></BODY></HTML> Fri, 04 May 2012 06:40:44 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906761#M437766 axeleratorcisco 2012-05-04T06:40:44Z pix 525 subinterfaces https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906762#M437767 <HTML><HEAD></HEAD><BODY><P>Yup, That is correct. I thought you had the sub interfaces configured already. </P><P>Glad it is working now. </P><P></P><P>Cheers.</P><P></P><P>Mike </P></BODY></HTML> Fri, 04 May 2012 16:14:47 GMT https://community.cisco.com/t5/network-security/pix-525-subinterfaces/m-p/1906762#M437767 Maykol Rojas 2012-05-04T16:14:47Z