topic command authorisation in 8.4 for object network in Network Security https://community.cisco.com/t5/network-security/command-authorisation-in-8-4-for-object-network/m-p/1940056#M437924 <P>Hi guys,</P><P></P><P>I just tried to do a quick privilege level setup for a user to limit access to asa. User should be able to add nat's to configuration. </P><P></P><P>ASA 8.4 is in question and trying the following does not seem to work:</P><P></P><P>privilege configure level 3 command object</P><P></P><P>gives me :</P><P></P><P>ERROR: specified command 'object' not found in any mode.</P><P></P><P>It looks like localy this cannot be done or I am doing something wrong?</P><P></P><P></P><P></P><P></P><P>Thnx...</P> Mon, 11 Mar 2019 22:59:40 GMT uzbrdicanagib 2019-03-11T22:59:40Z command authorisation in 8.4 for object network https://community.cisco.com/t5/network-security/command-authorisation-in-8-4-for-object-network/m-p/1940056#M437924 <P>Hi guys,</P><P></P><P>I just tried to do a quick privilege level setup for a user to limit access to asa. User should be able to add nat's to configuration. </P><P></P><P>ASA 8.4 is in question and trying the following does not seem to work:</P><P></P><P>privilege configure level 3 command object</P><P></P><P>gives me :</P><P></P><P>ERROR: specified command 'object' not found in any mode.</P><P></P><P>It looks like localy this cannot be done or I am doing something wrong?</P><P></P><P></P><P></P><P></P><P>Thnx...</P> Mon, 11 Mar 2019 22:59:40 GMT https://community.cisco.com/t5/network-security/command-authorisation-in-8-4-for-object-network/m-p/1940056#M437924 uzbrdicanagib 2019-03-11T22:59:40Z command authorisation in 8.4 for object network https://community.cisco.com/t5/network-security/command-authorisation-in-8-4-for-object-network/m-p/1940057#M437925 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>Remember that there is object-group and Object network, can you try to put Object Network and avoid any confusions of the ASA? Or maybe Add both? Or better Yet, if he wants to create a nat, he will need to add the NAT commands inside the object or global configuration mode. Try to narrow it down to NAT command only. </P><P></P><P>Mike.</P></BODY></HTML> Thu, 03 May 2012 03:48:10 GMT https://community.cisco.com/t5/network-security/command-authorisation-in-8-4-for-object-network/m-p/1940057#M437925 Maykol Rojas 2012-05-03T03:48:10Z