topic ASA Upgrading in Network Security

ASA Upgrading

Ahmed Eiran — Mon, 11 Mar 2019 23:31:02 GMT

Dears,

i have one ASA running version (8.2) and another one running version (8.4).. i want to replace them with each other.. my question is: if i backup the configuration from (8.2) and upload it to (8.4), will this ASA (8.4) accept this configuration or should i migrate this configuration to the new version first? note that i want to keep the ASA (8.2) as it is to maintain a rollback plan.

Appreciate your Support Guys.

ASA Upgrading

Mohammad Alhyari — Sun, 15 Jul 2012 13:38:56 GMT

Hi Ahmad ,

in case you put the 8.2 config on the ASA running 8.4 directly , that will not work as it will refuse most of the commands ( NAT + Anyconnect ) due to the changes that have been added to 8.4.

if you load IOS 8.2 on the ASA and then the 8.2 config and upgrade the ASA to 8.4 then it will auto migrate the config directly .

if you want to have 8.2 then you can do that , just keep the image on the flash and also a backup config file for the 8.2 config and then use the downgrade command :

http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/d2.html#wp2002627

hope that this helps .

Mohammad.

ASA Upgrading

Ahmed Eiran — Sun, 15 Jul 2012 16:56:10 GMT

Thx Mohammed,

Appreciate it.. that was really informative.

ASA Upgrading

Mohammad Alhyari — Sun, 15 Jul 2012 18:05:27 GMT

Hi Ahmad ,

you are more than welcome .

please remember to rate helpful posts .

thanks .

Mohammad.