topic ASA Firewall Commands in Network Security https://community.cisco.com/t5/network-security/asa-firewall-commands/m-p/1988621#M440022 <HTML><HEAD></HEAD><BODY><P>If you have an ACL-entry for that particular host you can use "show access-list" where you see the hit-count at the end of the ACE.</P><P></P><P>The more general way is to enable logging to a SYSLOG-server, where you can filter for "build connections" and your IP.</P><P></P><P>If you want a free graphical user-interface you could try PLA (PIX logging architecture). This software is not maintained for many years but still works fine.</P></BODY></HTML> Wed, 04 Jul 2012 07:46:24 GMT Karsten Iwen 2012-07-04T07:46:24Z ASA Firewall Commands https://community.cisco.com/t5/network-security/asa-firewall-commands/m-p/1988620#M440021 <P>Hi,</P><P></P><P>How can i check the hits in a firewall with respect to a given IP.</P><P>i want to check whether my network is hitting an ip (say 10.10.10.10) , what is the CLI command to check ?</P> Mon, 11 Mar 2019 23:26:11 GMT https://community.cisco.com/t5/network-security/asa-firewall-commands/m-p/1988620#M440021 aryarahul 2019-03-11T23:26:11Z ASA Firewall Commands https://community.cisco.com/t5/network-security/asa-firewall-commands/m-p/1988621#M440022 <HTML><HEAD></HEAD><BODY><P>If you have an ACL-entry for that particular host you can use "show access-list" where you see the hit-count at the end of the ACE.</P><P></P><P>The more general way is to enable logging to a SYSLOG-server, where you can filter for "build connections" and your IP.</P><P></P><P>If you want a free graphical user-interface you could try PLA (PIX logging architecture). This software is not maintained for many years but still works fine.</P></BODY></HTML> Wed, 04 Jul 2012 07:46:24 GMT https://community.cisco.com/t5/network-security/asa-firewall-commands/m-p/1988621#M440022 Karsten Iwen 2012-07-04T07:46:24Z