topic Firepower 8350 implementation in Network Security

Firepower 8350 implementation

farhan.bhatti1 — Sun, 10 Mar 2019 13:36:11 GMT

Hi good day to everyone, currently we are working on project with Firepower deployment. Our requirement is to utilize two FP 8350 appliance in HA (Active / Standby) with inline inpspection option.

I am confused about implementation with port channel, how to enable port-channel using inline mode to filter traffic from / to Datacenter. This FP is physically connected to ASA 5585X via two 10 GE and two 10 GE is connected with 68K. Now i need to put each two ports in one etherchannel. What will be the best practice for configuring FP in inline mode with port-channel.

ASA 5585X--------- ASA 5585 X (Active / Standby)

| | ||

FP 8350--------------FP 8350 (Active / standby)

|| ||

6807====VSS====6807

Server Farm

Hello Farhan,

Jetsy Mathew — Fri, 29 Apr 2016 15:17:11 GMT

Hello Farhan,

Please refer the following user guide and see if that helps :-

http://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/IPS-Devices.html#pgfId-7177421

Regards

Jetsy

One more useful document for

Jetsy Mathew — Fri, 29 Apr 2016 15:20:46 GMT

One more useful document for you.

http://www.cisco.com/c/en/us/support/docs/security/sourcefire-firepower-8000-series-appliances/117897-cinfig-sourcefire-00.html