topic Allow all traffic from frame relay in Network Security https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985797#M440784 <HTML><HEAD></HEAD><BODY><P>I've fixed. IT is necessary to add an EXEMPT in the NAT rules. </P></BODY></HTML> Sat, 16 Jun 2012 03:16:57 GMT Dario Francesco Vanin 2012-06-16T03:16:57Z Allow all traffic from frame relay https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985795#M440782 <P>Hi experts,</P><P></P><P>I am installing an ASA 5520 and I have a problem on accepring the incoming traffic from an external office connected via Frame Relay.</P><P></P><P>On my OUTSIDE interface I have both the internet traffic and the external office traffic incoming. What comes from the external office is visible as 10.1.0.0/16.</P><P></P><P>I have to allow this traffic to enter the internal network, without any control. I would also keep the original IP address.</P><P></P><P>I have configured the Firewall but I don't know how to setup the NAT. Can you please help me doing it? </P><P></P><P>Thanks,</P><P>Dario</P> Mon, 11 Mar 2019 23:20:03 GMT https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985795#M440782 Dario Francesco Vanin 2019-03-11T23:20:03Z Allow all traffic from frame relay https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985796#M440783 <HTML><HEAD></HEAD><BODY><P>The error I have is as follow:</P><P></P><PRE><A name="wp6175477"> </A>%ASA-5-305013: Asymmetric NAT rules matched for forward and reverse </PRE></BODY></HTML> Sat, 16 Jun 2012 01:22:08 GMT https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985796#M440783 Dario Francesco Vanin 2012-06-16T01:22:08Z Allow all traffic from frame relay https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985797#M440784 <HTML><HEAD></HEAD><BODY><P>I've fixed. IT is necessary to add an EXEMPT in the NAT rules. </P></BODY></HTML> Sat, 16 Jun 2012 03:16:57 GMT https://community.cisco.com/t5/network-security/allow-all-traffic-from-frame-relay/m-p/1985797#M440784 Dario Francesco Vanin 2012-06-16T03:16:57Z