topic Thanks for answer. in Network Security

FirePOWER installation

Jon Are Endrerud — Sun, 10 Mar 2019 13:32:59 GMT

Hey everyone

I have ordered FirePOWER for my 5555-X and recived a SSD disk and a PAK number.

I think I heard somewhere that i need two 120SSD disks, I only have one. Is it enough ?

And is this the correct order:

1. Shutdown/uninstall old IPS

2. Insert SSD

3. Reload

4. Install FirePOWER

Thanx

The 5555-X is designed to be

Marvin Rhoads — Tue, 02 Feb 2016 14:53:44 GMT

The 5555-X is designed to be used with two SSDs in a RAID 1 array.

It will work with one but will not have RAID protection.

(edit - corrected Raid type to "1".)

Thanks for answer.

Jon Are Endrerud — Tue, 02 Feb 2016 14:53:45 GMT

Thanks for answer.

Can I start with one, and add a second disk later ? Or will this be a problem.

The hardware installation

Marvin Rhoads — Tue, 02 Feb 2016 15:05:53 GMT

The hardware installation guide says "You can install two SSDs in a RAID 1 configuration in the ASA 5545-X and ASA 5555-X. "

Reference:

http://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5500xguide/5500xhw/asa_procs.html#pgfId-1108551

Note it doesn't say you MUST. I do know it will work if one fails after the system has been built. However the documentation doesn't explicitly address your use case.