topic Re: failover license in Network Security https://community.cisco.com/t5/network-security/failover-license/m-p/309786#M446725 <HTML><HEAD></HEAD><BODY><P>The output of the show version says "Failover: Enabled". That tells you that with the current activation key failover is enabled. What you need to ensure next is that the harware and software versions match exactly with that of the primary unit.</P></BODY></HTML> Thu, 01 Apr 2004 17:35:38 GMT jsivulka 2004-04-01T17:35:38Z failover license https://community.cisco.com/t5/network-security/failover-license/m-p/309785#M446706 <P>Hi, I must set up this pix to replace another that is broken down. It worked like a failover,</P><P> and I would like to know if this pix has the right license to do it.</P><P>Many thanks inadvance</P><P></P><P></P><P>pix# sh ver</P><P></P><P>Cisco PIX Firewall Version 6.2(2)</P><P>Cisco PIX Device Manager Version 2.1(1)</P><P></P><P>Compiled on Fri 07-Jun-02 17:49 by morlee</P><P></P><P>pix up 40 secs</P><P></P><P>Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz</P><P>Flash E28F128J3 @ 0x300, 16MB</P><P>BIOS Flash AM29F400B @ 0xfffd8000, 32KB</P><P></P><P>Encryption hardware device : IRE2141 with 2048KB, HW:1.0, CGXROM:1.9, FW:6.5</P><P>0: ethernet0: address is 000b.fd81.e8ef, irq 10</P><P>1: ethernet1: address is 000b.fd81.e8f0, irq 11</P><P>2: ethernet2: address is 00e0.b606.81cf, irq 11</P><P>3: ethernet3: address is 00e0.b606.81ce, irq 10</P><P>4: ethernet4: address is 00e0.b606.81cd, irq 9</P><P>5: ethernet5: address is 00e0.b606.81cc, irq 5</P><P>Licensed Features:</P><P>Failover: Enabled</P><P>VPN-DES: Enabled</P><P>VPN-3DES: Disabled</P><P>Maximum Interfaces: 6</P><P>Cut-through Proxy: Enabled</P><P>Guards: Enabled</P><P>URL-filtering: Enabled</P><P>Inside Hosts: Unlimited</P><P>Throughput: Unlimited</P><P>IKE peers: Unlimited</P><P></P><P>Serial Number: 807044799 (0x301a86bf)</P><P>Running Activation Key: 0x532907f3 0xd26ba632 0xf3a8ade0 0xa70b67da</P><P>Configuration last modified by enable_15 at 07:22:13.690 UTC Fri Mar 26 2004</P> Fri, 21 Feb 2020 07:18:47 GMT https://community.cisco.com/t5/network-security/failover-license/m-p/309785#M446706 pgasol 2020-02-21T07:18:47Z Re: failover license https://community.cisco.com/t5/network-security/failover-license/m-p/309786#M446725 <HTML><HEAD></HEAD><BODY><P>The output of the show version says "Failover: Enabled". That tells you that with the current activation key failover is enabled. What you need to ensure next is that the harware and software versions match exactly with that of the primary unit.</P></BODY></HTML> Thu, 01 Apr 2004 17:35:38 GMT https://community.cisco.com/t5/network-security/failover-license/m-p/309786#M446725 jsivulka 2004-04-01T17:35:38Z