Cisco VPN Client issue while changing the vpn pool

vinodk_gupta — Mon, 11 Mar 2019 22:56:47 GMT

Hi,

We have already implemented Cisco client VPN service on Cisco ASA. My Cisco VPN ip pool is configured 174.26.4.0/22 & My corporate network pool is 172.26.4.0/22. which is working perfectly.

My concern is VPN pool 174.26.4.0/22 is comes under public range so i want to change this pool into private range (172.30.100.0/24)

so i changed below configuration.

no access-list nonat extended permit ip 172.26.4.0 255.255.252.0 174.26.4.0 255.255.252.0
no ip local pool testpool 174.26.4.0-174.26.4.253

access-list nonat extended permit ip 172.26.4.0 255.255.252.0 172.30.100.0 255.255.255.0
ip local pool testpool 172.30.100.1-172.30.100.254

After changing, i am able to connect vpn & vpn machine got ip address 172.30.100.1.

during VPN connection, vpn machine (172.30.100.1) is pinging from corporate network & even take the remote also but from VPN machine (172.30.100.1) I am not able to ping corporate network.

i am not able to understand where is my mistake?

Please help us

Regards

vinod Gupta

9810966625

Cisco VPN Client issue while changing the vpn pool

joseph.steve — Sat, 21 Apr 2012 09:33:07 GMT

Paste your full configuration

Cisco VPN Client issue while changing the vpn pool

mvsheik123 — Sun, 22 Apr 2012 21:43:03 GMT

Config will definitely help but did you check if the VPN client getting corp network routes? Check the splittunnel settings.

thx

topic Cisco VPN Client issue while changing the vpn pool in Network Security

Cisco VPN Client issue while changing the vpn pool

Cisco VPN Client issue while changing the vpn pool

Cisco VPN Client issue while changing the vpn pool