topic PIX 501 route outside command in Network Security https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929694#M457959 <HTML><HEAD></HEAD><BODY><P>Hi Angel, </P><P></P><P>My assumption is that you have a speed issue between the outside interface of the PIX and the new ISP equipment.</P><P></P><P>You have statically set the outside interface "interface ethernet0 10baset"</P><P></P><P>Please post :</P><P></P><P>show int e0</P><P></P><P>PS : nice software version 6.2 <SPAN __jive_emoticon_name="happy" __jive_macro_name="emoticon" class="jive_macro jive_emote" src="https://community.cisco.com/4.5.4/images/emoticons/happy.gif"></SPAN></P><P></P><P>Regards</P><P>Dan</P></BODY></HTML> Mon, 19 Mar 2012 18:56:44 GMT Dan-Ciprian Cicioiu 2012-03-19T18:56:44Z PIX 501 route outside command https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929693#M457958 <P>All,</P><P></P><P>I have a friend trying to configure an existing PIX.&nbsp; They needed to change IP addresses due to ISP switch.&nbsp; Config was very basic but whenever he puts in the route outside command the PIX seems to take it but then he is saying it is disappearing when he checks the config.&nbsp; Does anyone have any ideas what this could be?&nbsp; He only changed outside IP address, a static translation</P><P></P><P></P><P>All replies rated.&nbsp;&nbsp; Thanks in advance! </P> Mon, 11 Mar 2019 22:44:12 GMT https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929693#M457958 angel-moon 2019-03-11T22:44:12Z PIX 501 route outside command https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929694#M457959 <HTML><HEAD></HEAD><BODY><P>Hi Angel, </P><P></P><P>My assumption is that you have a speed issue between the outside interface of the PIX and the new ISP equipment.</P><P></P><P>You have statically set the outside interface "interface ethernet0 10baset"</P><P></P><P>Please post :</P><P></P><P>show int e0</P><P></P><P>PS : nice software version 6.2 <SPAN __jive_emoticon_name="happy" __jive_macro_name="emoticon" class="jive_macro jive_emote" src="https://community.cisco.com/4.5.4/images/emoticons/happy.gif"></SPAN></P><P></P><P>Regards</P><P>Dan</P></BODY></HTML> Mon, 19 Mar 2012 18:56:44 GMT https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929694#M457959 Dan-Ciprian Cicioiu 2012-03-19T18:56:44Z PIX 501 route outside command https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929695#M457960 <HTML><HEAD></HEAD><BODY><P> TUrns out the tech was plugged into the wrong equipment.</P></BODY></HTML> Mon, 19 Mar 2012 20:48:22 GMT https://community.cisco.com/t5/network-security/pix-501-route-outside-command/m-p/1929695#M457960 angel-moon 2012-03-19T20:48:22Z