topic FWSM IPV6 in Network Security https://community.cisco.com/t5/network-security/fwsm-ipv6/m-p/1903483#M458060 <P>Can anyone point me to a FWSM doc detailing IPV6 support? I know that V6 is only supported</P><P>in routed mode and there is no failover. Is there a roadmap or is the module being phased out?</P><P></P><P></P><P>mike</P> Mon, 11 Mar 2019 22:42:37 GMT Michael Johnson 2019-03-11T22:42:37Z FWSM IPV6 https://community.cisco.com/t5/network-security/fwsm-ipv6/m-p/1903483#M458060 <P>Can anyone point me to a FWSM doc detailing IPV6 support? I know that V6 is only supported</P><P>in routed mode and there is no failover. Is there a roadmap or is the module being phased out?</P><P></P><P></P><P>mike</P> Mon, 11 Mar 2019 22:42:37 GMT https://community.cisco.com/t5/network-security/fwsm-ipv6/m-p/1903483#M458060 Michael Johnson 2019-03-11T22:42:37Z FWSM IPV6 https://community.cisco.com/t5/network-security/fwsm-ipv6/m-p/1903484#M458064 <HTML><HEAD></HEAD><BODY><P>Other than the section configuration guide covering IPv6 (<A href="http://www.cisco.com/en/US/customer/docs/security/fwsm/fwsm41/configuration/guide/ipv6_f.html">here</A>), I don't know of any specific document detailing IPv6 support for the FWSM. Cisco does not generally publicly publish roadmaps outlining future products enhancements.</P><P></P><P>Product-wise, while the FWSM has not been announced to be end-of-sales I would expect the majority of development effort by Cisco in this arena to favor the new ASA Service Module. Note the Q&amp;A for the ASA-SM <A href="http://www.cisco.com/en/US/customer/prod/collateral/modules/ps2706/ps11621/qa_c67-662207.html">here</A>. The ASA-SM does support IPv6 failover. See the <A href="http://www.cisco.com/en/US/customer/docs/security/asa/asa84/configuration85/guide/route_overview.html#wpxref33354">configuration guide</A>.</P></BODY></HTML> Thu, 15 Mar 2012 15:57:34 GMT https://community.cisco.com/t5/network-security/fwsm-ipv6/m-p/1903484#M458064 Marvin Rhoads 2012-03-15T15:57:34Z