Zone based firewall - cannot assign interface to zone

Brunhuber Adrian — Mon, 11 Mar 2019 22:42:32 GMT

I have a weird problem .

I want to configure a zone based firewall but i have the folowing problem

I have a router who performs router o a stick and a WAN connection .

From the CCP GUI when i click add a zone i don`t see the interface GigabitEthernet0/1 to choose from the list. (see the printscreen)

GigabitEthernet0/0 217.xxx.xxx.xxx YES NVRAM up up

GigabitEthernet0/1 192.168.1.1 YES NVRAM up up

GigabitEthernet0/1.10 10.10.10.1 YES NVRAM up up

Any ideeas ?

Thanks

Zone based firewall - cannot assign interface to zone

Marvin Rhoads — Thu, 15 Mar 2012 17:29:48 GMT

I believe that both 192.168.1.1 and 10.10.10.1 need to be configured on their respective subinterfaces. Make a subinterface like Gi0/1.1 and assign it the 192.168.1.1 address instead of the parent interface.

topic Zone based firewall - cannot assign interface to zone in Network Security

Zone based firewall - cannot assign interface to zone

Zone based firewall - cannot assign interface to zone