topic ACL not working in Network Security

ACL not working

Zahan Al-Rashid — Mon, 11 Mar 2019 22:34:42 GMT

Hi All,

I have a rule in place on the DMZ interface to allow all traffic through from 192.168.203.14 to anywhere; I get the message below but not sure what it means, please advice if you know:

Feb 24 2012 10:39:44: %ASA-6-106100: access-list ACL_DMZ_IN denied tcp dmz/192.168.203.14(1637) -> outside/4.27.4.126(80) hit-cnt 2 300-second interval [0x78c869df, 0x0]

Regards

Zahan

Re: ACL not working

Matt Lang — Fri, 24 Feb 2012 12:10:54 GMT

Please post your access list so we can take a look at it.

Sent from Cisco Technical Support iPhone App

ACL not working

Zahan Al-Rashid — Fri, 24 Feb 2012 15:57:39 GMT

Hi Matt,

I just want to know what the ACL is doing as I am not sure what -> means. is it saying IP address 192.168.203.14 recieved on DMZ hence activating ACL_DMZ_IN was denied access to 4.27.4.126 outside interface on port 80?

ACL not working

cadet alain — Mon, 27 Feb 2012 13:06:04 GMT

Hi,

yep, this is what it means but apparently this is not the behaviour you're expecting ?

Regards.

Alain