topic ASA software upgrade , Cisco Adaptive Security Appliance Softwar in Network Security

ASA software upgrade , Cisco Adaptive Security Appliance Software Version 7.0(6)

Bledar Meta — Mon, 11 Mar 2019 22:30:48 GMT

i use this ASA :

asa# show version

Cisco Adaptive Security Appliance Software Version 7.0(6)
Device Manager Version 5.0(6)

System image file is "disk0:/asa706-k8.bin"
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB

Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs              : 100
Inside Hosts                : Unlimited
Failover                    : Active/Active
VPN-DES                    : Enabled
VPN-3DES-AES                : Enabled
Security Contexts          : 2
GTP/GPRS                    : Disabled
VPN Peers                  : 750

This platform has an ASA 5520 VPN Plus license.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I need help to upgrade software pls !

ASA software upgrade , Cisco Adaptive Security Appliance Softwar

Kimberly Adams — Thu, 16 Feb 2012 16:50:54 GMT

What specifically are you looking to do here? Go to the latest code or just learn how to do the upgrades? Is there a version you would like to upgrade to?

http://www.cisco.com/en/US/customer/products/ps6120/products_configuration_example09186a008067e9f9.shtml

This is a basic link on the process to upgrade the image on the ASA.

Thanks,

Kimberly

Re: ASA software upgrade , Cisco Adaptive Security Appliance Sof

Bledar Meta — Thu, 16 Feb 2012 17:01:53 GMT

I just need to upgrade my software it is really to old .

I can not open the link above :

Forbidden File or Application

ASA software upgrade , Cisco Adaptive Security Appliance Softwar

Kimberly Adams — Thu, 16 Feb 2012 17:06:27 GMT

All you need to do is go to Cisco.com and in the search bar put in ASA Upgrade. This is one of the first documents that came up in the search. You may need a cisco.com login.

Thanks,

Kimberly

ASA software upgrade , Cisco Adaptive Security Appliance Softwar

Marvin Rhoads — Thu, 16 Feb 2012 17:41:18 GMT

Upgrades are not free. To download the software image requires a valid support contract (or a specific purchase).

The document telling you how to upgrade is available to all registered users of cisco.com.

By the way, a 5520 with 512 MB of RAM cannot upgrade beyond version 8.2(x) without a memory upgrade.

ASA software upgrade , Cisco Adaptive Security Appliance Softwar

Patrick0711 — Thu, 16 Feb 2012 19:40:35 GMT

Remember, the latest isnt always the greatest when it comes to code versions. Each code version has it's own caveats and quirks (including a number of inconsistencies and bugs that aren't documented publicly). Unless you need an extravagant NAT configuration, you want to use 6-to-4 VPN tunnels, or you want to use IKEv2, there aren't many other major reasons to upgrade past 8.2

ASA software upgrade , Cisco Adaptive Security Appliance Softwar

Marvin Rhoads — Thu, 16 Feb 2012 20:00:51 GMT

There's also Identity Firewall, license clustering, and Etherchannel features enabled on 8.4.

I've seen adoption rates for 8.4 increasing among customers (and it is what the TAC and Cisco SEs are recommending).