topic ASA working fine but no console Access in Network Security

ASA working fine but no console Access

g-oliveira — Mon, 11 Mar 2019 22:27:56 GMT

Hi all

I have an asa 5585x cluster.

I get ssh access but no console access on the standby unit.

On the active unit, when I try console access, ASA ask for a password.

I have tried all the one that I have configured, but without success.

Any idea ?

ASA working fine but no console Access

Richard Burts — Fri, 10 Feb 2012 19:38:22 GMT

It might be good to start investigating this by posting the part of the configuration that deals with aaa authentication. If we see this we may get some idea of what is causing the issue.

HTH

Rick

ASA working fine but no console Access

Marvin Rhoads — Sat, 11 Feb 2012 03:17:56 GMT

I'm with Rick on this one.

Please provide output from "show run | i console". We would be looking for (among other things) a line something like "aaa authentication serial console"....

ASA working fine but no console Access

g-oliveira — Mon, 13 Feb 2012 11:11:46 GMT

Hi all

I didn't refer thar i'm on a multy context environment. Heare is the concole config

FW03/act/admin# sh run | i console

aaa authentication enable console TACACS+F1 LOCAL

aaa authentication http console TACACS+F1 LOCAL

aaa authentication ssh console TACACS+F1 LOCAL

aaa authentication serial console TACACS+F1 LOCAL

aaa accounting enable console TACACS+F1

aaa accounting ssh console TACACS+F1

FW03/act/admin#

FW03/act/admin# ch c system

FW03/act# sh run | i console

console timeout 10

FW03/act#

Thanks for the support

ASA working fine but no console Access

g-oliveira — Thu, 16 Feb 2012 17:23:50 GMT

Hi All

Reboot on both nodes, and problem solved.

Thanks for the support.

ASA working fine but no console Access

Richard Burts — Thu, 16 Feb 2012 17:47:02 GMT

Thanks for posting back to the thread to tell us that a reboot fixed the problem. It is good to know that it is working now. It would be nice to know what the original problem was.

HTH

Rick