topic Re: Updating ADSM in Network Security

Updating ADSM

Andy White — Mon, 11 Mar 2019 22:27:34 GMT

Hello,

I'm have upgraded our ASA 5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded:

configure mode commands/options:

disk0:/asa708-k8.bin disk0:/asa843-k8.bin disk0:/asdm-508.bin

disk0:/asdm-647.bin disk0:/crypto_archive

ciscoasa(config)# asdm image disk0:/asdm-647.bin

Device Manager image set, but not a valid image file disk0:/asdm-647.bin

What is the problem?

Updating ADSM

ajay chauhan — Fri, 10 Feb 2012 11:01:00 GMT

ASA 8.0(3)

ASDM 6.0(3) and later. Recommended: 6.4(7).

Image is Ok.

Did you change boot parameters?

show run boot

Thanks

Ajay

Re: Updating ADSM

mathieupoussin — Fri, 10 Feb 2012 16:35:26 GMT

If you have done this before rebooting the ASA to the new firmware, this is normal, just reboot it and it should be fine

Sent from Cisco Technical Support iPhone App

Updating ADSM

Marvin Rhoads — Sat, 11 Feb 2012 03:12:50 GMT

Your command and directory filenames look OK.

Is your asdm-647.bin file size ~17,483 KB? If not, you might want to re-download asdm-647.bin from cisco.com and re-copy it onto disk0: (after deleting the current copy).