topic FWSM + VSS Support in Network Security

FWSM + VSS Support

imran.moulvi — Mon, 11 Mar 2019 22:02:52 GMT

Hello All,

We are planning to convert our 6509 chasis' into a VSS.

Each chasis house an FWSM.

The chasis are running the following IOS- Release 12.2(33)SXH8b and FWSM are at 3.2(Application software)

We understand that the FWSM need to be upgraded but arent sure if the newer 4.0 or 4.1 versions will be compatible the IOS version on the supervisor.

Can someone please advise on this.

FWSM + VSS Support

varrao — Fri, 16 Dec 2011 12:41:16 GMT

Hi Imran,

You can go through these release notes and it should give you all the info you need:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html

Hope that helps.

Thanks,

Varun

FWSM + VSS Support

imran.moulvi — Fri, 16 Dec 2011 12:45:23 GMT

Hi Varun,

I've checked the releaase notes for 4.0 & 4.1 as well however none of them mention the IOS version that I am running.

So I am not sure if this is compatible with the FWSM software.

Regards,

FWSM + VSS Support

ajay chauhan — Fri, 16 Dec 2011 14:35:52 GMT

FWSM Release 4.0(4) is the first release that will support FWSM integration in a VSS environment (Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks needs to run Cisco IOS Software Release 12.2(33)SXI).

FWSM + VSS Support

ajay chauhan — Fri, 16 Dec 2011 15:04:46 GMT

Firewall Services Module (FWSM) (WS-SVC-FWM-1-K9)

12.2(33)SXI

4.0.4

Just to add this will be minimum requirement . In regard to your 2nd question 4.1 will be the new release.

Thanks

Ajay