topic ASA 5505 transparent mode setup in Network Security

ASA 5505 transparent mode setup

p0663843ccie — Mon, 11 Mar 2019 21:59:44 GMT

Hi guys,

i need to configure a ASA 5505 in transparent mode.

learned from Internet, my configuration is :

int e0/0 --- vlan 1---->nameif outside

int e0/4 --- vlan 2------> nameif inside

gloable ip is 172.17.104.10 255.255.255.0

http server enable

http 172.17.104.0 255.255.255.0 inside

when i connect the outside interface to one PC with ip addr 172.17.104.194

my PC connect to inside interface with ip 172.17.104.249

cannot ping each other even when i set rules as permit any any on both direction

varrao — Tue, 06 Dec 2011 10:03:40 GMT

Hi,

Can you send me an output of "show run interface", moreover you have the https server enabled on the inside interface and not on the outside.

Thanks,

Varun

p0663843ccie — Tue, 06 Dec 2011 11:44:11 GMT

hi man thanks for reply the issue was resolved. one vlan was down i did not notice

Sent from my iPhone