How to remove a Vlan-Group from a FWSM

rathinilesh — Mon, 11 Mar 2019 21:59:17 GMT

Hi All,

I am trying to remove a vlan group that is attached to an FWSM installed on a 6500 Switch

My original vlan group is as below

firewall module 8 vlan-group 40,41,42,43,44,45,46,47

I am now trying to remove vlan-group 45 with the below command

no firewall module 8 vlan-group 45

The problem is it is removing all the other vlan-groups as well. Could anybody advice what am I missing?

Also I understand that "firewall vlan-group" should be used to allocate vlan-groups to FWSM and "svclc vlan-group" should be used to allocate vlan-groups to the ACE. But for a vlan shared between the FWSM and the ACE, is it best to use a "firewall vlan-group" or a "svclc vlan-group" ??

Regards,

Nilesh

How to remove a Vlan-Group from a FWSM

V S Narayana Chivukula — Tue, 06 Dec 2011 16:03:58 GMT

Hi Nilesh,

The issue you are facing is because of a bug. Bug id : CSCti85352 . Please check the link below for the bug details and the release in which it is fixed :

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCti85352

Regards,

Narayana

topic How to remove a Vlan-Group from a FWSM in Network Security

How to remove a Vlan-Group from a FWSM

How to remove a Vlan-Group from a FWSM