topic Firewall management port in Network Security

Firewall management port

Nilesh Waykar — Mon, 11 Mar 2019 21:57:24 GMT

Hi,

we are having a firewall asa 5520 .we have connected the management port and inside port to internal network and dmz port to dmz network.now we need to configure tacacs and other management tool on dmz devices through management port. The problem is the management devices tacacs and other are placed in internal network.

Firewall management port

Maykol Rojas — Thu, 01 Dec 2011 04:24:15 GMT

Hi,

So, what is the issue? Are you using TACACs with the ASA firewall or for devices on the DMZ? I dont see the problem, whatever the TACACs is located, the ASA should be able to get to it for proper aaa configuration. If you need to use the TACACS server for devices on the DMZ what you need to do is just to allow port tcp 49 across the ASA.

Mike

Firewall management port

Alexander Moorthy — Thu, 01 Dec 2011 11:03:40 GMT

Hi,

I couldnt understand what the issue is. If you want to place the all the management tool and tacacs in the DMZ, then change the IP address and assign them in the DMZ segment.