topic Re: clear counters on PIX Firewall Interfaces in Network Security

clear counters on PIX Firewall Interfaces

bericaleb — Fri, 21 Feb 2020 11:06:38 GMT

How can I clear counters on my PIX Firewall 515E ver 6.3(4). There are alot of input errors on my inside interface. Please advice.

Re: clear counters on PIX Firewall Interfaces

Jon Marshall — Tue, 18 Nov 2008 09:00:37 GMT

pix(config)# clear counters

or if you want to clear only a particular interface

pix(config)# clear counters

Jon

Re: clear counters on PIX Firewall Interfaces

bericaleb — Tue, 18 Nov 2008 22:15:51 GMT

It doesn't work on PIX FIREWALL 515E version 6.3(4)

Re: clear counters on PIX Firewall Interfaces

Jon Marshall — Tue, 18 Nov 2008 22:22:19 GMT

Bernadette

Apologies, it is not "clear counters" it is "clear counter".

You also need to make sure you are doing this in config mode -

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/c.html#wp1091147

Jon

Re: clear counters on PIX Firewall Interfaces

JORGE RODRIGUEZ — Wed, 19 Nov 2008 01:24:22 GMT

As Jon indicated, you need to be in config mode,

try - pix(config)#clear interface to reset all interface counters.

for especific interface

(config)#clear interface

(config)#clear interface ethernet0

etc..

Rgds

Jorge

Re: clear counters on PIX Firewall Interfaces

bericaleb — Wed, 19 Nov 2008 02:06:56 GMT

it doesn't work.

Re: clear counters on PIX Firewall Interfaces

JORGE RODRIGUEZ — Wed, 19 Nov 2008 02:37:37 GMT

did you go into config mode and enter the command?

e.i

pix>enable

pix#config

pix(config)#clear interface

Re: clear counters on PIX Firewall Interfaces

julomban — Thu, 27 Nov 2008 23:59:54 GMT

"clear interface" but that might not correct the issue, when you get CRS errors that indicates that there is an issue with cables or problems with speed or duplex of the neighbors devices.