topic Allow Traceroute in 8.4 in Network Security https://community.cisco.com/t5/network-security/allow-traceroute-in-8-4/m-p/1745464#M493905 <HTML><HEAD></HEAD><BODY><P>Hi Jack,</P><P></P><P>You can use the same document:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml</A></P><P></P><P>There are no chnages in the command for traceroute in ASA 8.4</P><P></P><P>Thanks,</P><P>Varun</P></BODY></HTML> Mon, 07 Nov 2011 19:01:08 GMT varrao 2011-11-07T19:01:08Z Allow Traceroute in 8.4 https://community.cisco.com/t5/network-security/allow-traceroute-in-8-4/m-p/1745463#M493902 <P>I have been searching to find out how to allow traceroute from an inside host to an outside IP address. I have found a few articles for IOS versions prior to 8.4 but nothing for 8.4. I can traceroute from the CLI of the 5510 just fine but from a windows host on the inside network all I get is Request timed out </P> Mon, 11 Mar 2019 21:47:08 GMT https://community.cisco.com/t5/network-security/allow-traceroute-in-8-4/m-p/1745463#M493902 jpodplesky 2019-03-11T21:47:08Z Allow Traceroute in 8.4 https://community.cisco.com/t5/network-security/allow-traceroute-in-8-4/m-p/1745464#M493905 <HTML><HEAD></HEAD><BODY><P>Hi Jack,</P><P></P><P>You can use the same document:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml</A></P><P></P><P>There are no chnages in the command for traceroute in ASA 8.4</P><P></P><P>Thanks,</P><P>Varun</P></BODY></HTML> Mon, 07 Nov 2011 19:01:08 GMT https://community.cisco.com/t5/network-security/allow-traceroute-in-8-4/m-p/1745464#M493905 varrao 2011-11-07T19:01:08Z