topic Re: Configuring Redundancy using 2 Pix in Network Security https://community.cisco.com/t5/network-security/configuring-redundancy-using-2-pix/m-p/969473#M494110 <HTML><HEAD></HEAD><BODY><P>You can configure the two PIX'es for Active/Standby failover. Following links may help you</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/failover.html" target="_blank">http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/failover.html</A></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/failover.html" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/failover.html</A></P></BODY></HTML> Fri, 07 Mar 2008 20:02:42 GMT didyap 2008-03-07T20:02:42Z Configuring Redundancy using 2 Pix https://community.cisco.com/t5/network-security/configuring-redundancy-using-2-pix/m-p/969472#M494109 <P>Hi, I have my corporate network where I'am using a VPN Concentrator 3000. I have a remote site where I have 2 Pix 506E. I would like to have a redundancy or failover between my Pix.</P><P>How can I have it? </P><P>What do you suggest to me?</P><P></P> Fri, 21 Feb 2020 09:55:27 GMT https://community.cisco.com/t5/network-security/configuring-redundancy-using-2-pix/m-p/969472#M494109 Leonardo Pena Davila 2020-02-21T09:55:27Z Re: Configuring Redundancy using 2 Pix https://community.cisco.com/t5/network-security/configuring-redundancy-using-2-pix/m-p/969473#M494110 <HTML><HEAD></HEAD><BODY><P>You can configure the two PIX'es for Active/Standby failover. Following links may help you</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/failover.html" target="_blank">http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/failover.html</A></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/failover.html" target="_blank">http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/failover.html</A></P></BODY></HTML> Fri, 07 Mar 2008 20:02:42 GMT https://community.cisco.com/t5/network-security/configuring-redundancy-using-2-pix/m-p/969473#M494110 didyap 2008-03-07T20:02:42Z