topic PIX 515 issue after trying to upgrade from 601 to 622 in Network Security https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804675#M494127 <HTML><HEAD></HEAD><BODY><P>Correct.</P></BODY></HTML> Mon, 07 Nov 2011 12:18:04 GMT rdefuria 2011-11-07T12:18:04Z PIX 515 issue after trying to upgrade from 601 to 622 https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804673#M494125 <P>Hello,</P><P></P><P>I am having the following problem on my Cisco PIX 515:</P><P></P><P>I had been running:</P><UL><LI>Cisco Secure PIX Firewall Version 6.0(1)</LI><LI>PIX Device Manager Version 1.0(1)</LI><LI>Hardware:&nbsp;&nbsp; PIX-515, 32 MB RAM, CPU Pentium 200 MHz</LI><LI>Flash i28F640J5 @ 0x300, 16MB</LI><LI>BIOS Flash AT29C257 @ 0xfffd8000, 32KB</LI></UL><P></P><P>I upgraded the PIX to pix622.bin.&nbsp; That seemed to work, but the PIX did not boot after reload.</P><P></P><P>So I reverted it to pix601.bin.</P><P></P><P>That seemed to work, and my configuration file was still in place and all my services worked as before.</P><P></P><P>However, upon reload I get the following error:</P><P style="padding-left: 30px;">Reading 2445824 bytes of image from flash.</P><P style="padding-left: 30px;">32MB RAM</P><P style="padding-left: 30px;">imgsum_config: sumval(0x1f8e) md5(0x95937073 0x75b817db 0x54d7811a 0xba7d0214)</P><P style="padding-left: 30px;">imgsum_verify: chksum(0x&nbsp;&nbsp; 0) md5(0xf9d77cec 0xfca32e88 0xb13f21e9 0xfa81733b)</P><P style="padding-left: 30px;">Panic: kernel - The checksum verification for this image failed.</P><P></P><P>Thoughts?&nbsp; Help?</P> Mon, 11 Mar 2019 21:46:09 GMT https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804673#M494125 rdefuria 2019-03-11T21:46:09Z PIX 515 issue after trying to upgrade from 601 to 622 https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804674#M494126 <HTML><HEAD></HEAD><BODY><P>You get this error using the console right? </P><P></P><P>Mike </P></BODY></HTML> Sat, 05 Nov 2011 05:05:48 GMT https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804674#M494126 Maykol Rojas 2011-11-05T05:05:48Z PIX 515 issue after trying to upgrade from 601 to 622 https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804675#M494127 <HTML><HEAD></HEAD><BODY><P>Correct.</P></BODY></HTML> Mon, 07 Nov 2011 12:18:04 GMT https://community.cisco.com/t5/network-security/pix-515-issue-after-trying-to-upgrade-from-601-to-622/m-p/1804675#M494127 rdefuria 2011-11-07T12:18:04Z